New H180 Loader

Utility Loaders
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Compatible with 4R Series Tractors and older 4 Series Tractors of similar size
  • Quik-Park™ loader mounting system for fast, easy attachment and removal
  • Quik-Change™ attachment carrier makes switching from chore to chore a snap
  • Optional skid steer attachment carrier

More Info

Features

Optional skid steer attachment carrier
Optional skid steer attachment carrierOptional skid steer attachment carrier

The skid steer attachment carrier is installed in place of the standard John Deere attachment carrier and allows for the use of skid steer attachments on the H180, H160, and H165 Loaders.

Skid steer attachments are available through Worksite Pro Attachments.

Quik-Park™ loader mounting system

To view a video of how the Quik-Park™ system works click here.

 

NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Quik-Park loader mounting systemQuik-Park loader mounting system

The H180 Loader is designed for easy removal and mounting to and from the tractor without tools.

 

Parking standParking stand

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the park position.

Tractor backing awayTractor backing away
Quik-change attachment carrier
Easy removal and mounting of attachmentsEasy removal and mounting of attachments
Close up of Quik-Change attachment mountingClose up of Quik-Change attachment mounting

Allows fast, easy removal and mounting of attachments without tools.

 

Specifications

Tractor
Model 4X20
Front tire 8.00-16 6PR R1 TI
Rear tire 13.6-28 4PR R1 TI
Front axle configuration MFWD
Wheelbase 1816 mm
71.4 in.
Pump capacity 60.2 L/min
16 gpm
Rated pressure 17.2 MPa
2500 psi
Loader
Leveling configuration Non-Self-Leveling
Bucket used Materials - 73 in.
Bucket weight 146 kg
321 lb
Lift capacity at full height Measured at pivot (U)
1128 kg
2482 lbMeasured at 500 mm ahead of pivot (V)
844 kg
1857 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
1345 kg
2959 lbMeasured at 500 mm ahead of pivot (X)
1075 kg
2365 lb
Boom breakout force Measured at pivot (Y)
1841.6 kgf
4060 lbfMeasured at 500 mm ahead of pivot (Z)
1395.5 kgf
3076 lbf
Bucket rollback force capacity At maximum height (VV)
982.3 kgf
2166 lbfAt 59-in. (1500-mm) lift height (XX)
1513.6 kgf
3337 lbfAt ground-level line (ZZ)
1614.5 kgf
3559 lbf
Dimensions Maximum lift height (A)
2820 mm
111 in.At full height - bucket level(B)
2615 mm
103 in.At full height - bucket dumped (C)
2218 mm
87 in.
Overall length (I+F), ft (m) 3.5 m
11.5 ft
Overall height in carry position (J) 1.5 m
5 ft
Digging depth (H) 119 mm
4.7 in.
Reach At maximum height (D)
751 mm
30 in.At ground level - bucket level (F)
1698 mm
67 in.
Bucket angle Dump angle, degrees (E)
47.14 degree (angle)Rollback angle, degrees (G)
42.4 degree (angle)Dump angle, ground
130 degree (angle)
Cycle times Loader raise, seconds
4.31 secondsLoader lower, seconds
3.36 secondsBucket dump, seconds
2.83 secondsBucket rollback, seconds
2.58 seconds

Accessories and Attachments

Buckets

61 In. (1550 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge - BW14764
Heavy-duty bucketsHeavy-duty buckets

Heavy-duty buckets are available for tasks requiring more robust bucket designs. Recommended for heavier use applications, such as commercial operations.

 

Top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

 

Additional strength is built into the bucket design with additional wear bars, boxed top bucket section, and bucket end plate supports.

 

Cutting edge has pre-drilled holes for addition of a replaceable cutting edge.

61 In. (1550mm) Loader Materials Bucket - Quik Change - BW14146
1550-mm (61-in.) materials bucket1550-mm (61-in.) materials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

 

IMPORTANT: Materials buckets are not recommended for heavy-duty tasks. For heavier use applications, use heavy-duty bucket.

 

The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

 

There is a quik-change connection for easy on and off.

 

The round-back design helps material flow when filling or dumping the bucket.

66 in. Construction Bucket (16.2 cu. ft.) with Edge - KV24751
66 in. Foundry Bucket (14.6 cu. ft.) - KV11636
66 in. Utility Bucket (20.6 cu. ft.) - KV22801
72 In. Quik-Tatch Heavy Duty Front Loader Bucket w/Replaceable Cutting Edge - LVB25342
72-in. Quik-Tatch heavy-duty bucket72-in. Quik-Tatch heavy-duty bucket

A general purpose heavy-duty bucket is available for field installation. This bucket is recommended for moderate to severe-duty applications. It includes a bolt-on reversible and replaceable cutting edge.

 

NOTE: This bucket will ship from Quad-Cities warehouse location.

72 In. Quik-Tatch Standard Front Loader Bucket - LVB25341
72-in. Quik-Tatch standard-duty bucket72-in. Quik-Tatch standard-duty bucket

An economical standard-duty bucket is available for field installation. This bucket is recommended for light-duty applications. It does not include a bolt-on replaceable cutting edge.

 

NOTE: This bucket will ship from Quad Cities warehouse location.

73 In. (1850 mm) Heavy Duty Bucket with Bucket Loops and Holes for Cutting Edge - BW16358
Heavy-duty bucketsHeavy-duty buckets
Heavy-duty bucketsHeavy-duty buckets

Heavy-duty buckets are available for tasks requiring more robust bucket designs.

Recommended for heavier use applications, such as commercial operations.

Top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

Additional strength is built into the bucket design with additional wear bars, boxed top bucket section, and bucket end plate supports.

Cutting edge has pre-drilled holes for addition of a replaceable cutting edge.
Now equipped with bucket loops for chain applications.

73 In. (1850 mm) Loader Heavy Duty Bucket with Holes for Cutting Edge - BW14765
Heavy-duty bucketsHeavy-duty buckets

Heavy-duty buckets are available for tasks requiring more robust bucket designs. Recommended for heavier use applications, such as commercial operations.

 

Top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

 

Additional strength is built into the bucket design with additional wear bars, boxed top bucket section, and bucket end plate supports.

 

Cutting edge has pre-drilled holes for addition of a replaceable cutting edge.

73 In. (1850 mm) Loader High Volume Bucket - BW14658
High-volume bucketHigh-volume bucket

This is a large-capacity bucket for the 300CX, H165, 400X, 400CX, and H180 Loaders for light material use such as handling mulch, sawdust, feed, and snow.

 

IMPORTANT: Not designed to withstand heavy material or usages other than light materials.

 

The top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

 

Quick-change for easy on and off. 

 

Round-back design helps material flow when filling or dumping the bucket.

73 In. (1850mm) Loader Materials Bucket - BW14147
Materials bucketsMaterials buckets

Materials buckets are available to match tractor and loader applications. May be used for loading dirt, gravel, feed and light materials, as well as scrapping, digging and other general purpose tasks.

 

IMPORTANT: Materials buckets are not recommended for heavy-duty tasks. For heavier-use applications, use the heavy-duty bucket.

 

Top surface of the bucket is parallel to cutting edge, which aids operator as a leveling guide.

Quik-Change connection for easy on and off.

 

Round-back design helps material flow when filling or dumping the bucket.

84 In. Light Material Bucket - LVB25345
213.4-cm (84-in.) light-materials bucket213.4-cm (84-in.) light-materials bucket

A utility or light-materials loader bucket is available for field installation or OE bucket replacement. This bucket is recommended for efficient movement of light or high-volume materials (less than 75 lb/cu ft or 1.22 kg/cu L).

 

At 213.4 cm (84-in.), it is 0.3-m (1-ft) wider than the standard buckets. It also has a slightly higher and longer profile. It does not include a bolt-on replaceable cutting edge.

 

NOTE: This bucket will ship from the Quad Cities warehouse location.

85 In. (2150 mm) Loader High Volume Bucket - BW15273
High-volume bucketHigh-volume bucket

This is a large-capacity bucket for the 300CX, H165, 400X, 400CX, and H180 Loaders for light material use such as handling mulch, sawdust, feed, and snow.


 IMPORTANT: Not designed to withstand heavy material or usages other than light materials.

 

The top surface of the bucket is parallel to the cutting edge, which aids operator as a leveling guide.

 

Quick-change for easy on and off. 

 

Round-back design helps material flow when filling or dumping the bucket.

Carrier

John Deere CUT Carrier - BW16184

Cutting Edges

61 In. (1550 mm) Replaceable Bucket Cutting Edge with Hardware - BW14762

Recommended for heavier use applications, such as commercial operations and rental customers.

 

Additional strength is added to the cutting edge and the replaceable cutting edge is reversible for longer wear life.

 

Not compatible with tooth bars.

 

NOTE:  Heavy-duty buckets come standard with the holes to install the replaceable cutting edge.  Standard materials buckets require installation of attaching holes.

73 In. (1850 mm) Replaceable Bucket Cutting Edge with Hardware - BW14763
Bucket cutting edgeBucket cutting edge
Closeup of cutting edgeCloseup of cutting edge
Hardware for cutting edgeHardware for cutting edge

Recommended for heavier-use applications, such as commercial operations and rental customers. Additional strength is added to the cutting edge. Replaceable and reversible cutting edge for longer wear life.

 

DECAL KIT

Text Free Decals for Export - BW16365

HITCH ADAPTERS

iMatch Bushing Kit - BW15056
iMatch quick-coupler bushing kitiMatch quick-coupler bushing kit

Bushing kit for use with Category 1 implements (ballast box) to make them function correctly with the iMatch Quick-Hitch.

HYDRAULIC CONNECTION - LOADER TO IMPLEMENT

Third Function Hydraulic kit (hoses and parts) - BW16414
Third-function hydraulic lines and hosesThird-function hydraulic lines and hoses
Attachment BW16414 provides metal lines along boom and flexible hydraulic hoses to connect to tractor mid-valveAttachment BW16414 provides metal lines along boom and flexible hydraulic hoses to connect to tractor mid-valve

Provides hydraulic couplers at the front of the loader boom for operating attachments that require third-function hydraulics.


NOTES:

  1. Tractor must be equipped with a third selective control valve (SCV).
  2. If installing H180 Loader on 4M Tractor, the dual mid-valve and third electrohydraulic (EH) valve kit will be needed from tractor hydraulics.
  3. If used with skid steer attachments, couplers will not match. The following parts are required to convert for this application:
  • 1- KV14216
  • 1- KV15976
  • 2- AT191333

Hood Guards

Deluxe Brush Guard Attachment - BW16989
#
#

A hood guard with brush screen for 4R Tractors.

Deluxe Hood Guard Attachment - BW15222
Deluxe hood guard attachmentDeluxe hood guard attachment

Hood guard attachment to make BW15219 or BW15221 into a deluxe hood guard.

Deluxe Hood Guard Attachment - BW16155
#
#

A hood guard with brush screen for 4R Tractors.

Hood Guard - BW16335
Hood guard for 4R Series TractorsHood guard for 4R Series Tractors

A hood guard can be ordered for a tractor without ordering a loader.

 

The hood guard protects the front of the tractor while operating the loader.

 

The bolt-on design stays with tractor when loader is removed.

Hood Guard (4120-4720) - BW15221
Deluxe hood guard with brush screenDeluxe hood guard with brush screen

A hood guard can be ordered for a tractor without ordering a loader.

 

The hood guard protects the front of the tractor while operating the loader.

 

The bolt-on design stays with tractor when loader is removed.

Hydraulics

Dual Mid Valve Kit - BLV10879

This attachment allows for the installation of the dual mid-valve kit on 4M Tractors. With this kit 4M Tractors can now utilize various implements, such as the H180 Loader, as well as other hydraulic driven implements. This kit allows the 4M Tractor to operate hydraulically and function similar to the 4R Open Station Tractors.

 

Kit contains the dual mid-valve, loader joystick, hydraulic lines, and all fittings / hardware that is required.

Dual mid-valve (Shown on 4R)Dual mid-valve (Shown on 4R)
Hydraulic lines from mid-valve to tractorHydraulic lines from mid-valve to tractor
Two-function joystick (Shown on 4R)Two-function joystick (Shown on 4R)
Complete kit images
#
#

Available Dec, 2016

Hoses to tractor mid-valve - BW16221
Shown with boom removedShown with boom removed

This bundle consists of the hoses and parts to connect from the loader boom hydraulic lines of the H180 Loader to the mid-mount area hydraulic couplers on the compatible tractor.

 

NOTE: For an H180 Loader/4M Tractor field-installed dual mid-valve kit see BLV10879.

Single Point Hydraulic Connector - BW16220
Single-point connector shown on H180 Loader on a 4R TractorSingle-point connector shown on H180 Loader on a 4R Tractor
Single-point connector shown on H180 Loader on a 4R TractorSingle-point connector shown on H180 Loader on a 4R Tractor
Single-point connector shown on H180 Loader on a 4R TractorSingle-point connector shown on H180 Loader on a 4R Tractor
Single-point connector shown on H180 Loader on a 4R TractorSingle-point connector shown on H180 Loader on a 4R Tractor

This option, only available on open operator station (OOS) tractors, contains the hoses and single-point hydraulic connector to run from the tractor mid-valve to the H180 Loader. The single-point connector allows the customer to park and remove the loader with even more ease than the traditional multi-couplers.

 

NOTE: For an H180 Loader/4M Tractor field-installed dual mid-valve kit see BLV10879.

LOADER SUSPENSION SYSTEM

Loader suspension kit (H180 Only) - BW16470
Nitrogen-charged accumulator and electric valveNitrogen-charged accumulator and electric valve
Operator on/off switchOperator on/off switch
LSS on H180LSS on H180
LSS on 5E and 5MLSS on 5E and 5M

An enhancement to the loader is the suspension system. A great level of loader productivity is achieved with the LSS.

  • An accumulator charged with nitrogen and connected to the head-end lift cylinder hose through a T-fitting provides shock absorption
  • The cylinders move in and out to allow the boom to float 

Performance

  • Bales can be transported more efficiently from one end of the field to the other over frozen, hard-packed, or rutted terrain.

NOTE: Check bale handling capability of tractor before use.

  • Pallets can be moved easily without sustaining cargo damage
  • Pallets of seed or fertilizer can be carried across a yard without a bag spilling and creating a costly mess
  • Properly ballasted tractor with LSS has increased stability, creating a smoother ride for the operator

Cost of Ownership

  • Extended life of loader pins and bushings
  • Less stress on tractor axle

Reasons for turning LSS off include:

  • Digging applications - With LSS on, the cylinders retract slightly, losing lifting power
  • Holding a grade when blading - With LSS on, it is difficult to hold a constant grade
  • Precise pallet and bale handling - With LSS on, the load moves up and down slightly while being positioned
  • Parking a loader - With LSS on, when down pressure is applied, the lift cylinders retract slightly, making it more difficult to park

The switch is conveniently located in the operator station to avoid having to exit the operator station to manually move the handle on the LSS.

LSS can also be ordered with a manual shutoff. Depending on the tractor/loader model, the accumulator is located in different places. On the H180 the accumulator is mounted outside the bottom of the mounting frame. On the 5 Series tractors, the accumulator is mounted near the inside of the rear right wheel. On 6 series tractors and larger, it is mounted in between the hydraulic connection and the mounting frame.

Miscellaneous

Anti -Drop Valve Kit - Bucket Circuit - BW16050
Anti -Drop Valve Kit - Lift Circuit - BW16049
Bucket Level Indicator - BW16364
Bucket level indicatorBucket level indicator

The bucket level indicator assists the operator to determine the attachment position at ground level.

 

It is adjustable to indicate level position for different attachments such as pallet forks and buckets.

 

The indicator is adjusted to have the bend of the rod rest in the bracket when the attachment is level at ground.

Hanging Weldment Kit - BW16393
Deluxe hood guard with brush screenDeluxe hood guard with brush screen

A hood guard can be ordered for a tractor without ordering a loader.

 

The hood guard protects the front of the tractor while operating the loader.

 

The bolt-on design stays with tractor when loader is removed.

Skid Steer Attachment Carrier - BW15244
Skid steer attachment carrierSkid steer attachment carrier

The skid steer attachment carrier is installed in place of the standard John Deere attachment carrier and allows for the use of skid steer attachments on the 300CX, H160, H165, H180, 400X and 400CX Loaders.

Skid steer attachments are available through Worksite Pro™ attachments.

Miscellaneous (Australia Only)

Service Locks (boom cylinders) - BW16466

Mounting Frames

Mounting Frame - BW16171
OOS mounting frameOOS mounting frame

Mounting frames are designed at the same time as the tractor in order to provide durable and yet very simple attaching points for the loader. The mounting frames bolt to the tractor chassis and do not restrict tractor use when the loader is not installed. 

Mounting Frame - BW16268
Cab mounting frameCab mounting frame

Mounting frames are designed at the same time as the tractor in order to provide durable and yet very simple attaching points for the loader. The mounting frames bolt to the tractor chassis and do not restrict tractor use when the loader is not installed.

OPERATOR'S MANUAL AND DECAL KIT

Spanish North American operator's manual and decal kit - BW16290

Tooth Bars

61 In. (1550 mm) Tooth Bar for Bucket - BW15227
Tooth barTooth bar

The tooth bar helps penetrate hard-packed material.  It attaches to the bucket by sliding over the cutting edge and is retained by two bolts, one in each end plate of the bucket.

  • Holes must be drilled in bucket end plates to retain the tooth bar
  • Protrudes beyond bucket edge approximately 150 mm or 6 in.
  • Recommended for use with heavy-duty buckets only
  • Not compatible with buckets with replaceable cutting edge installed
73 In. (1850 mm) Tooth Bar for Bucket - BW15228
Tooth barTooth bar

The tooth bar helps penetrate hard-packed material.  It attaches to the bucket by sliding over the cutting edge and is retained by two bolts, one in each end plate of the bucket.

  • Holes must be drilled in bucket end plates to retain the tooth bar
  • Protrudes beyond bucket edge approximately 150 mm or 6 in.
  • Recommended for use with heavy-duty buckets only
  • Not compatible with buckets with replaceable cutting edge installed