New 120R Loader

Utility Loaders
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Compatible with the 1023E, 1025R and 2025R tractors
  • Quik-Park stands for easy attachment and removal
  • 754 lbs. (342 kg) of lift capacity
  • 72 in. (1,828 mm) of lift height

More Info

Features

Easily remove and mount loader to and from the tractor without tools
Quik-Park™ loader mounting systemQuik-Park™ loader mounting system
#

The Quik-Park mounting system on the 120R Loader is designed for easy removal and mounting to and from the tractor without tools.

 

Just like on the former H120, the parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.

 

To view a video of how the Quik-Park™ system works click here.

 

NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

 

Easy removal and mounting (shown on a noncurrent 1026R)Easy removal and mounting (shown on a noncurrent 1026R)
Mount to and from the tractor without toolsMount to and from the tractor without tools
D120
#

The D120 does not utilize the Quik-Park system as used on the 120R, but rather has two parking stands that are stored within the torque tube for a manual parking process.

 

Remove the parking stand from the torque tube area and place within the loader foot plate during the parking process (as shown).

Once the loader weight is being supported by the bucket and parking stands, manually remove the pins from the mast assembly and disconnect hydraulics.

#
#

 After installing the parking stands, removing the parking pins and disconnecting hydraulics, simply back away.

#
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pinPivot pin
Pivot pins shown on the 120R LoaderPivot pins shown on the 120R Loader

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.

 

A nut ensures the pins remain in position.

 

A lubrication groove provides a path for lubrication.

 

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Specifications

Tractor
Model 1025R/1023E/1026R Tractor
Front tire 23x8.50-12 6PR R4 CL
Rear tire 12.00-16.5 6PR R4 CL
Front axle configuration
Wheelbase 1600 mm
Pump capacity 26.5 L/min
Rated pressure 2146 psi
Loader
Leveling configuration
Bucket used General Material 1250
Bucket weight 70.2 kg
154 lb
Lift capacity at full height Measured at pivot (U)
342 kg
754 lbMeasured at 500 mm ahead of pivot (V)
236 kg
520 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
337 kg
743 lbMeasured at 500 mm ahead of pivot (X)
263 kg
580 lb
Boom breakout force Measured at pivot (Y)
826 kg
1823 lbMeasured at 500 mm ahead of pivot (Z)
599 kg
1320 lb
Bucket rollback force capacity At maximum height (VV)
741 kg
1634 lbAt 59-in. (1500-mm) lift height (XX)
770 kg
1700 lbAt ground-level line (ZZ)
819 kg
1807 lb
Dimensions Maximum lift height (A)
1828 mm
72 in.At full height - bucket level(B)
1671 mm
65.8 in.At full height - bucket dumped (C)
1371 mm
54 in.
Overall length (I+F), ft (m) 2786 mm
107.9 in.
Overall height in carry position (J)
Digging depth (H) -88 mm
-3.2 in.
Reach At maximum height (D)
626 mm
24.7 in.At ground level - bucket level (F)
1186 mm
46.7 in.
Bucket angle Dump angle, degrees (E)
-40.5 degree (angle)Rollback angle, degrees (G)
29.87 degree (angle)Dump angle, ground
-115.4 degree (angle)
Cycle times Loader raise, seconds
3.2 secondsLoader lower, seconds
3.2 secondsBucket dump, seconds
3.1 secondsBucket rollback, seconds
2.2 seconds

Accessories and Attachments

Ballast Box

Ballast Box - BW15073
#

Ballast box can be used to carry additional ballast for greater tractor stability.

 

A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

 

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch.

 

A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

Ballast Box Extension - BW15074
Ballast box with extensionBallast box with extension

Ballast box can be used to carry additional ballast for greater tractor stability.

 

A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

 

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch.

 

A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

 

Ballast box extension is only available through parts; not a factory option.

Buckets

49 In. (1250mm) Loader Materials Bucket - Quik Change - BW14144
Materials bucketMaterials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks. The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

 

There is a quik-change connection for easy on/off. 

 

The round-back design helps material flow when filling or dumping the bucket.

 

The 1250-mm (49.2-in.) bucket is standard on the 120R Loader for field-installed orders.

 

For loaders installed out of Augusta, GA on tractors, the base bucket will be the 1350-mm (53-in.) bucket. 

 

It is also compatible with the 220R Loader, as the carrier assembly is the same (but may not cover the width of the model year 2017 2R Series Tractor). 

 

When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.

 

When the 220R Loader ordered field installed (palletized), the loader ships from Augusta, GA.

 

For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).

53 In. (1350mm) Loader Materials Bucket - Quik Change - BW14145
Materials bucketMaterials bucket

Materials buckets are available to match tractor-loader applications. The buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks. The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

 

There is a quik-change connection for easy on/off.

 

When the 220R Loader is ordered factory installed on model year 2017 2R Tractors, the 1450-mm (57-in.) materials bucket is base equipment.

 

For non-model year 2017 2R Tractors, the bucket and other specific configuration items will need to be ordered through Parts (such as mounting frames, and hood guard).

Carrier

John Deere CUT Carrier - BW15939
Quik-change attachment carrier Quik-change attachment carrier
CUT carrier (quik-change) on 220R Loader and 1450-mm (57-in.) standard bucketCUT carrier (quik-change) on 220R Loader and 1450-mm (57-in.) standard bucket

The quik-change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground. To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier. Then install the retaining pins and the carrier is ready to work.

This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments.

HITCH ADAPTERS

iMatch Bushing Kit - BW15056
iMatch quick-coupler bushing kitiMatch quick-coupler bushing kit

Bushing kit for use with Category 1 implements (ballast box) to make them function correctly with the iMatch Quick-Hitch.

Hood Guards

Deluxe Hood Guard (1023E, 1025R, 1026R) - BW15901
Deluxe hood guard shown on H120 LoaderDeluxe hood guard shown on H120 Loader

The deluxe hood guard protects the front of the tractor while wrapping around the hood for extra added protection. The bolt-on design stays with the tractor when the loader is removed.

 

The hood guard is fixed and provides full tractor access for regular service.

 

Standard on 120R Loaders, the hood guard can be ordered for a tractor without ordering a loader.

 

The deluxe hood guard is the same for both the D120 and 120R Loaders; however, it is only available as field-installed option for the D120 Loaders.

Hood Guard (1023E, 1025R & 1026R Tractors) - BW15900
Hood guard shown on D120 LoaderHood guard shown on D120 Loader
#

 

The hood guard protects the front of the tractor while operating the loader.

The bolt-on design stays with the tractor when the loader is removed.

The hood guard is fixed and provides full tractor access for regular service.

Standard on D120 Loaders, the hood guard can be ordered for a tractor without ordering a loader.

Miscellaneous

Anti -Drop Valve Kit - Bucket Circuit - BW16050
Anti -Drop Valve Kit - Lift Circuit - BW16049
French North American Operator's Manual and Decal Kit - BW16474
Hoses and Clamp - BW16182

Miscellaneous (Australia Only)

Anti Spill Kit - BXX10016
Service Locks - BXX10004

Mounting Frames

Mounting Frame - BW15898
Mounting Frame - ALD10025
Mounting Frame - ALD10023