| Specifications: | |
| MANUFACTURER |
John Deere |
| MODEL |
7930 180 PTO hp - AutoQuad PLUS |
| Official Test |
|
| Nebraska Test Number |
Nebr. OECD 1896, Summary #563 |
| Engine |
|
| Manufacturer |
John Deere |
| Aspiration |
Variable Geometry Turbocharger, Cooled Exhaust Gas Recirculation, Air-to-Air Aftercooled |
| Cylinders/Displacement, cu. in. (liters) |
6/414 (6.8) |
| Cylinder Liners |
Wet |
| Fuel Tank Cap., US Gal. (L) (Open; Cab) |
--- |
| Standard |
103 (390) without right hand step |
| Optional |
94 (356) with right hand step |
| Underhood muffler |
N/A |
| Performance |
|
| Advertised PTO HP (kW) @ Rated RPM |
180 (134) @ 2100 per SAE |
| Official PTO HP (kW) @ Rated RPM |
183.1 (136.54) @ 2100 per SAE |
| @ Standard PTO @ Eng RPM |
200.73 (149.68) @ 1953 per SAE |
| Maximum @ Eng RPM |
203.38 (151.66) @ 1850 per SAE |
| Advertised Engine HP (kW) @ Rated Speed |
220 (164) @ 2100 per ISO 97/68/EC |
| Max Unballast Drwbr HP (kW) @ Eng RPM |
165.51 (123.42) @ 2102 |
| Maximum Torque (PTO) @ RPM, lb-ft (Nm) |
653 lb-ft (885) @ 1601 |
| Max Torque Rise (80% Rtd Spd) @ Eng RPM |
36% @ 1701 |
| Maximum Torque Rise % (PTO) @ Eng RPM |
42.5% @ 1601 |
| Fuel Use, U.S. gal./hr. & HP hr./gal. at: |
|
| PTO @ Rated Eng RPM |
10.52 gal/hr, 17.41 HP hr/gal @ 2100 |
| Standard PTO Speed @ Eng Speed |
11.26 gal/hr, 17.82 HP hr/gal @ 1953 |
| Maximum PTO Power @ Eng RPM |
11.37 gal/hr, 17.89 HP hr/gal @ 1850 |
| Maximum Engine Power @ Eng RPM |
11.37 gal/hr, 17.89 HP hr/gal @ 1850 |
| Max Unballasted Drawbar Power @ Eng RPM |
15.75 HP hr/gal @ 2102 |
| 75% Load, Full Engine RPM (Unballasted) |
14.72 HP hr/gal @ 2157 |
| 75% Load @ Reduced RPM (Unballasted) |
16.20 HP hr/gal @ 1613 |
| Transmission |
|
| Std. Transmission; Forward/Reverse |
PowrQuad PLUS (30K); 16F/16R |
| Opt. Transmission; Forward/Reverse |
AutoQuad PLUS (40K/50K), IVT (40K/50K) |
| Reverser |
Left-hand (LH or RH with IVT) |
| On-the-Go Shifting (Yes/No/Partial) |
Partial |
| Clutch; Wet/Dry |
Wet |
| Creeper |
IVT |
| Power Take-Off (PTO) |
|
| Standard |
1-3/4-in. 20 spline 1000 |
| Optional |
1-3/4-in. 20 spline 1000 capable of 1-3/8-in. 540/1000; 1-3/4-in. 20 spline 1000 with 1-3/8-in. 540/1000 gearcase |
| PTO Speeds @ Engine RPM |
540 or 1000 at 1950 |
| PTO Actuation |
Electro-hydraulic |
| Hydraulics |
|
| Type |
Closed center, pressure & flow compensated |
| Pump Rated Output, GPM (L/min.) |
--- |
| Standard |
32 (121.1) |
| Optional |
45.2 (171.1) |
| Rated Flow @ One SCV, GPM (L/min.) |
30 (113.5) |
| Max Output @ SCV Couplers, GPM (L/min.) |
32 (121.1) std., 45.2 (171.1) opt. |
| Maximum Operating Pressure, PSI (kPa) |
2914 (20091) std., 2894 (19953) opt. |
| Maximum Hydraulic Power, HP (kW) |
46.9 (35) std., 65.4 (48.7) opt. |
| Hitch Draft Control Load Sense Type |
Electronic |
| Remote Control Valves Available |
2 std.; 4 rear, 2 Mid-Mounts + 1 on/off (max. 7) opt. |
| Hitch Category (SAE Designation) |
3/3N |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. |
--- |
| OECD |
--- |
| Standard |
10,987 (4,983) |
| Optional |
15,574 (7,064) |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (SAE) |
--- |
| Standard |
--- |
| Optional |
--- |
| Hitch Lift Cap. lb. (kg) @24"Bhnd Lift Pt. (ASAE) |
--- |
| Standard |
--- |
| Optional |
--- |
| Sensing Type |
Electro-hydraulic |
| Joystick SCV Control |
Opt. Mechanical or Electro-hydraulic |
| Final Drive |
|
| Type |
Inboard Planetary |
| Differential Controls |
Electro-hydraulic |
| Availability |
Yes |
| Front |
Yes |
| Front & Rear |
Yes |
| Engage On-the-Go Rear Differential Lock |
Yes |
| Axle Type |
Bar axle, rack and pinion |
| Brakes, Type and Control |
Hydraulic wet disk |
| Operator Station |
|
| Rollover Protective Structure, OOS |
N/A |
| Rigid - Foldable - Telescopic |
N/A |
| Platform - Flat/Straddle |
N/A |
| Gearshift Location - Console/Floor |
N/A |
| Cab |
--- |
| Doors |
LH std., RH opt. |
| Platform - Flat/Straddle |
Flat |
| dB(A) Rating |
67.7 |
| Seat Suspension System |
Air std., Active Seat opt. |
| 2WD Dimensions |
|
| Wheelbase, in. (mm) |
N/A |
| Front Tread Range, in. (mm) |
N/A |
| Rear Tread Range, in. (mm) |
N/A |
| Minimum Rear Tread Setting, in. (mm) |
N/A |
| Front Axle Clearance, in. (mm) |
N/A |
| Turning Radius w/Brakes, ft. (m) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
N/A |
| Unballasted Operating Weight, lb. (kg) |
N/A |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
N/A |
| MFWD Dimensions |
|
| Wheelbase, in. (mm) |
112.6 (2860) |
| Front Tread Range, in. (mm) |
60-88 (1523-2234) |
| Front Axle Clearance, in. (mm) |
34.5 (622) with 380/80R38 R1 front tires |
| Turning Radius w/Brakes, ft. (m) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
16.75 (5.1) with 420/90R30 R1 front tires |
| Limited Slip Differential |
Limited slip or hydraulic differential lock available |
| Unballasted Operating Weight, lb. (kg) |
18,016 (8,172) |
| Approx. Ship Wgt, lb. (kg) Open; Cab |
16,502 (7,484) w/ PQ+ or AQ+ MFWD; 17,131 (7,770) w/ IVT MFWD |
| 4WD Dimensions |
|
| Wheelbase, in. (mm) |
N/A |
| Wheel Tread, Min. to Max. in. (mm) |
N/A |
| Turning Radius w/o Brakes, ft. (m) |
N/A |
| Nebraska Test Unballasted w/Duals, lb.(kg) |
N/A |
| Unballasted Weight, lb. (kg) |
N/A |
| Standard Tires |
|
| 2WD |
N/A |
| Front |
N/A |
| Rear |
N/A |
| MFWD |
--- |
| Front |
420/90R30 (R1) |
| Rear |
480/80R46 (R1) |
| 4WD |
N/A |
| Track Widths |
N/A |
| Miscellaneous |
|
| Country of Manufacture |
Waterloo, Iowa USA |
| Ballasting Restrictions, lb. (kg) |
Refer to Operators Manual |
| *Notes |
Updated - 03/17/2009 |
